Package based on:
KA-F790NG Camera adapter with Neutrik and IDX VMount
RM-FP790PNCG Powered Base Station No Power with Neutrik and Clear-Com Intercom
VC-P790RMG Base Remote cable for RMLP25
KA-PW790VG Power Wafer
Camera back transceiver module attaches directly to the GY-HM890 body using a hidden 68-pin connector
The system simultaneously transports bidirectional digital (SDI or HD-SDI) and analog (NTSC or PAL) video
1 RU CopperHead Base Station
Two-way camera control, audio, video, data, sync, timecode, tally/call, prompter, and intercom signals between the camera head and CopperHead Base Station
SMPTE or Neutrik Hybrid Fiber adds power capability and can deliver up to 100W of power to the camera
Both cables are immune to interference
Head unit build in IP Interface adapter for Camera USB Host connections
NO
LANC support for remote units
NO
Serial remote support control
YES
Tally support
YES
System Cable maximal length
Notes on fiber with Copper
Fiber Cable includes Copper Wires to support Camera Power from Base station to the Camera Head (power Wafer) depending on the System and internal High Voltage is used.
Fiber with Copper max Cable length:
500 Meter
Notes on Fiber cable by Tactical use:
If you use tactical cable the power of the head unit must be prepare at the camera end. Tactical systems have no copper lines and transport only the Video and Control signals (no Power)
Fiber max. length in Tactical use:
10000 Meter
Electro-Optical operating Wavelengths
1300nm/1550nm
Electro-Optical TX Laser Output Power (std/opt)
-6dBm/0dBm
Electro-Optical RX Sensitivity, HD/SDI
-22 dBm
Electro-Optical Fiber Compatibility:
Single Mode
IN-OUT´s Connections
From Camera
HDSDI
From Camera:
VBS Program
From Camera
Camera Control /RS232/422
From Camera
Time Code
From Camera
Audio 1 and Audio 2
To Camera
HDSDI Return Video
To Camera
VBS Return 1 (G/L)
To Camera
VBS Return 2 Prompter
To Camera
VBS Return 3 VBS
To Camera
Time Code
To Camera
Tally
To Camera
Audio Return
To Camera
Intercom (One Channel)
Others
Power (only and Hybrid systems)
Power and Environment Spec´s
Power
220V Base-Station
Power Camera Unit
10-18VDC
Power consumption Camera Unit
8 Watts
Power Base Station
10-18VDC
Power consumption Base Station
10 Watts
Operation Temperature in Celsius
-25 to 55 degree
Operation Humidity:(Non-Condensing)
0% to 95%
Mechanical Informations
Base station dimensions:
W:444.5mm / H:228.6mm / D:44.4mm
Base station dimensions RACK height in Unit
1 U
Base station weight:
2.27 Kg
Head unit dimensions:
W:63.5mm / H:165.1mm / D:55.8mm
Head unit weight:
0.68 Kg
Power Wafer dimensions:
W:127mm / H:155.4mm / D:55.8mm
Power Wafer weight:
0.68 kg
Include Package
Instruction;
Yes
Others:
See above feature Information
General Editing Note
Note:
Simulated pictures.The values for weight and dimensions are approximate.E.&O.E. Design and specifications subject to change without notice.